Windows 10 Black Screen with Cursor [SOLVED] – Driver Easy

Looking for:

Windows 10 Black Screen with Cursor [SOLVED] – Driver Easy

Click here to Download


Method 2. Uninstall or update graphics card drivers If your computer’s graphics card drivers are incorrect, it may also cause the Windows 10 with cursor black screen issue, at this point, you can try uninstalling or updating the graphics card drivers to fix the problem. Update graphics card drivers When the Windows logo appears on your computer, press and hold the power button to turn off the electricity and repeat this operation 3 times to enter the Windows Recovery Environment Windows RE.

Locate and expand Display adapters , right-click on your graphics card, select Update driver in the expanded menu, then click on the Search automatically for updated driver software option. Uninstall the graphics card driver Open Device Manager in the same way, find and expand Display adapters , right-click on your card, click on Uninstall device option in the expanded menu and wait for its uninstallation to complete.

Method 3. Repeat booting and shutting down the computer 3 times to enter the Windows recovery environment, then refer to the above steps and press F4 to enter Windows Safe Mode. Find and open Hardware and Sound , then click on Power Options , then click on the Choose what the power buttons does option from the left sidebar. Click the Change settings that are currently unavailable option, uncheck the Turn on fast startup option, and then click Save and change.

Method 4. Activate the built-in Windows Administrator account The built-in administrator account can access your computer without any restrictions, but usually, it is inactive, so you need to activate the built-in Windows administrator account to lift the relevant restrictions, which will help to fix the problem of Windows 10 black screen with cursor. Type cmd in the taskbar search box and open the command prompt. In the Windows recovery environment, press F6 to enter Safe Mode with a network connection.

Method 6. Reset your computer If you are having the issue of Windows 10 black screen with cursor after updating Windows, you can try resetting your PC to fix the issue. In the Windows recovery environment, press F4 to enter Safe Mode. Method 7. Details required :. Cancel Submit. Hi, Welcome to Microsoft Community. If this resolves the black screen, use corruption resolution steps mentioned below: Method 1: Run the SFC. Follow the below steps: Open Command Prompt.

Now check for the issue. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to A. User’s post on August 7, So far the 3 methods have shown nothing. The very last point in method 3 was hard to fallow for me. Ricardo SVSA. First of all, thank you very much Annu Singh for your support. Please help! Click on the “Settings” icon to be redirected to the “System Settings” window. You will be directed to a mini window. You will be asked whether you wish to keep your files or not.

Choose the option as per your requirements and proceed ahead according to the instructions. If you know which software is causing the black screen problem, then you can remove the problematic software. In the Run search box, type “appwiz. From here you can find and remove any problematic software that’s causing the issue of black screen on your PC. Windows allows you to boot your PC in a clean state. It means booting your PC with all the unnecessary programs disabled.

This can help you in finding the problem. Now go to the “Services” tab on the window panel that pops up. Once you are under the “Services”, go to the “Hide all Microsoft Services” option located at the bottom edge of the window on the right side, and then click the Check-box next to it.

Once done, click on the “Disable All” option located at the bottom left of the window. Now, switch to the “Startup” tab located next to the “Service” tab on the same window. On the Startup tab, you’ll see the “Open Task Manager” option. Click on it to open Task Manager. On the Task Manager window, look for any Startup program that you think might be causing a problem. Disable all such Startup programs one by one using the “Disable” button at the bottom left of the window.

Once it’s done, close the Task Manager by using “X” for the selective window, and then click on “OK” on the Startup tab.

Now your PC will restart only with essential programs. Power supply problems. Display issues. Way 2: Reinstall Graphics Card Driver 1. Type in explorer. Choose Safe Mode. Log in your computer with the administrator privileges. Right click the update and choose Uninstall. Restart your Windows 7 computer normally. Way 4: Perform System Restore 1. Go to Advanced Boot Options while booting up your Windows 7 computer. Select Repair your computer.

Log in your Windows 7 account. Restart your Windows 7 after finishing the restoration. Way 5: Run Anti-Virus Software If your computer affected by virus, and did not run the anti-virus program, your system might be damaged by virus, download and execute this kind of software to scan and remove your virus. How to Prevent Windows 7 Black Screen of Death The above methods help you fix the black screen of death in Windows 7 effectively, but it is a painful process, since you may be at risk of data loss.

If the black screen with a cursor shows up again, then you know which piece of hardware is causing the problem. In this case, it is best that you replace that item. When you start to experience serious problems on your computer, you will be able to boot into Windows by using the Last Known Good Configuration. Doing so will let you load a properly functioning version of your operating system.

One of the reasons why the black screen gets stuck on your Windows PC is because there may be missing or outdated device drivers in your computer. So, we recommend updating your device drivers to their latest versions. You need to find the versions of the drivers that are compatible with your processor type and operating system. Be cautious when installing drivers because if you add the wrong version, it may cause system instability issues on your computer.

Moreover, it can consume a lot of your time. If you prefer an easier yet more reliable option, we suggest using Auslogics Driver Updater. With this tool, you will be able to update all your drivers in one go. Once you install it, it will recognize your processor type and operating system version automatically.

All you need to do is click a button, and Auslogics Driver Updater will do the rest. Unstable PC performance is often caused by outdated or corrupt drivers. Auslogics Driver Updater diagnoses driver issues and lets you update old drivers all at once or one at a time to get your PC running smoother.



Windows 10 Black Screen / no cursor before login during Startup – Microsoft Community – Windows 10 Black Screen with Cursor › Fix › Windows How can I fix the black screen without cursor on Windows 10? · 1. Use a dedicated repair tool · 2. Restart your computer · 3. Update your drivers.


Leave a Reply

Your email address will not be published. Required fields are marked *